IDT To Exhibit Industry-leading Semiconductor Solutions at 2012 Intel Developer Forum

Integrated Device Technology, Inc. (IDT®) (NASDAQ: IDTI), the Analog and Digital Company™ delivering essential mixed-signal semiconductor solutions, today announced that it will demonstrate its industry-leading products at the 2012 Intel® Developer Forum, September 11-13. IDT will exhibit select products that power, connect, and support Intel-based products and systems, including NVM Express (NVMe) flash controller, PCI Express® (PCIe®), timing, signal integrity, and RapidIO® solutions.

IDT will display a performance demonstration of its recently announced NVMe PCI Express flash memory controller. The 16-channel PCIe x4 Gen 3 (89HF16P04AG3) and 32-channel PCIe x8 Gen 3 (89HF32P08AG3) flash controllers are designed to fully comply with the NVMe standard – a standard that defines an optimized register interface, command set, and feature set for PCIe SSDs. This allows OEMs to build standards-based solid-state drive (SSD) solutions that dramatically improve performance and overcome throughput and latency bottlenecks inherent to legacy SAS/SATA-based SSD designs. IDT will also participate in the NVMe community booth at IDF alongside other industry leaders active in the development and use of NVMe. The NVMe community will be in Booth 440.

Alongside the NVMe flash controller, IDT will demonstrate its latest high-performance PCIe switches along with the industry’s first PCIe 3.0 signal-conditioning re-timers, targeted at enterprise computing, storage and communications applications. IDT will also showcase the industry’s first PCI Express Gen 2 to Serial RapidIO Gen 2 protocol conversion bridge – a breakthrough device that extends scalable RapidIO-enabled peer-to-peer multiprocessor clusters to the x86 processor environment.

Information on IDT’s current wireless power solutions and a recently announced development partnership with Intel will be available at the IDT booths. Intel recently selected IDT to develop an integrated transmitter and receiver chipset for Intel’s wireless charging technology based on resonance technology, as a result of IDT’s proven skill to integrate the required features and functionality into a monolithic solution. The IDT wireless power solutions offer unprecedented integration that results in significant space and cost savings in next-generation wireless power products.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more