2W Power Amplifiers with On Chip Power Detectors Cover 9 to 14 GHz!

Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions for communication & military markets, has introduced two new, 2 Watt GaAs pHEMT MMIC power amplifiers which cover the 9 to 14 GHz frequency range and are ideal for microwave radio, military and space, SATCOM and test & measurement applications.

The HMC952 and the HMC952LP5GE are four stage GaAs pHEMT MMIC 2 Watt Medium Power Amplifiers with temperature compensated on chip power detectors which operate between 9 and 14 GHz. These amplifiers provide 33 dB of gain, +35 dBm of saturated output power, and 27% PAE (Power Added Efficiency) from a +6V supply. With up to +43 dBm output IP3 the HMC952LP5GE is ideal for high linearity applications in military and space as well as high capacity point-to-point and point-to-multi-point radios. These powerful amplifiers also feature I/Os that are internally matched to 50 Ohms and require no external matching components which makes them ideal for use as drivers, or as the final power stage in a microwave transmitter chain.

The HMC952 die may be easily incorporated into MCMs, while the HMC952LP5GE leadless QFN 5 x 5 mm surface mount packaged version is compatible with high volume assembly equipment. Both amplifer versions are a much smaller alternative to bolt down power amplifier solutions, and complement Hittite's unmatched selection of active and passive components for microwave and millimeterwave radio applications.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more