Achieve SIL 3 without external redundancy

New TÜV-certified QUINT 20+ power supply for applications up to SIL 3

Phoenix Contact’s premium QUINT POWER line now includes a single-device solution that meets functional safety applications up to Safety Integrity Level (SIL) 3. The new QUINT 20+ power supply has an integrated decoupling MOSFET and double overvoltage protection circuitry to meet rigorous SIL 3 safety regulations without the need for external redundancy.

The QUINT 20+ power supply introduces a single conformally coated device solution with ATEX, IECEx and Class I, Division 2 approvals, which allows the power supply to be mounted within potentially explosive areas (Zone 2). The functional safety approval allows the QUINT 20+ power supply to be used in applications up to SIL 3, according to IEC 61508. The safety function is to limit the output voltage to 30 V DC, and if higher, to switch off within 20 milliseconds. The safe state is no output voltage. Designed with double overvoltage circuitry, the QUINT 20+ power supply also has a Hardware Fault Tolerance (HFT) of 1.

What is SIL and why is SIL important?

Safety Integrity Level (SIL) is a measure of safety system performance in terms of the probability of failure on demand.  As the SIL increases, the safety level of the product increases, meaning the probability that the system will fail to perform properly decreases. Often used in the processing industry, SIL provides intricate safety regulations to ensure the avoidance of catastrophic accidents and errors that can be detrimental to the most stringent operations.

Phoenix Contact’s QUINT4-PS/1AC/24DC/20/+ (2904617) power supply has been certified for functional safety applications in accordance to IEC 60950-1 and IEC 61010-1 and multiple EMC standards including EN61000-6-7. The power supply guarantees superior system availability with an integrated decoupling MOSFET and an overvoltage protection circuitry with SIL 3, HFT = 1 certification in accordance with IEC 61508. With a protective conformal coating and ATEX/IECEx approval in accordance with the standards IEC 60079-0, IEC 60079-7, IEC 60079-11, and IEC 60079-15, the QUINT Plus power supply can also be mounted within potentially explosive areas (zone 2).

The OVP circuitry built in the QUINT4-PS/1AC/24DC/20/+ (2904617) can be used to set up single or redundant bulk power systems with proven OVP. The power supply can be used in applications up to SIL 3, according to IEC 61508 and IEC 61511. The safety function is to limit the output voltage to 30 V DC. If the voltage rises above 30 V DC, the device will switch off within 20ms, creating a safe state of no output voltage.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more