Pulse IP67-Rated Penta-Band + GPS Antenna for Telematics

Pulse Electronics, a worldwide leader in electronic component and subassembly design and manufacturing, introduces its W4120  Series of multi-band active GPS antennas that combines compact size with the capability to support most major wireless services globally.  This low-cost antenna features a low-profile housing that complies with Ingress Protection 67, making it suitable for outdoor use.  The active GPS antenna provides accurate location-based information that can be communicated back to the tracking location via commonly used wireless frequencies around the world, enabling fleet management, pay-as-you-drive insurance, navigation, locating, and other telematics applications.

The W4120 series antennas operate over 5 frequency bands -- 824 to 894 MHz, 880 to 960 MHz, 1710 to 1880 MHz, 1850 to 1990 MHz, and 1920 to 2170 MHz -- plus GPS.  The amplifier input voltage of 3 or 5 volts DC provides 26dBic of gain and compatibility with most commercially available receivers.  The compact 136x38x14mm antennas come individually packaged with separate double-sided tape for easy installation in any environment.  Various cable lengths and connector options are available.

“As telematics are increasingly used in commercial and industrial as well as consumer electronics applications, demand for compact, high-performance multi-band antennas that also provide GPS capabilities continues to grow,” said Beatrice Colbeau, Pulse wireless device product manager.  “Pulse will continue supporting customers with a broad range of antenna products to meet their emerging needs.”

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more