Megger Steps up the Voltage for Insulation Analysis

With Megger’s new VAX020 high voltage amplifier, it is now possible to reliably assess insulation condition using proven dynamic frequency response (DFR) techniques, even in extreme high interference environments, such as HVDC substations. In addition, the new amplifier also eliminates the difficulties associated with testing low capacitance objects, such as bushings and instrument transformers, at low frequencies.

■ Separate high voltage amplifier enables capacitance and dissipation factor measurements at 2 kV test voltage
■ True and proven DFR/FDS technology for highest performance
■ Large frequency range, DC to 1 kHz
■ Compact design, weight <5 kg="kg" p="p">
Features of the VAX020
Designed primarily for use in conjunction with Megger’s popular IDAX300 insulation diagnostic analyzer, but compatible with all Megger IDAX and IDA instruments, the VAX020 amplifier is a compact lightweight unit that expands the instrument’s test voltage range from 200 V to 2 kV.

This high output voltage, particularly when combined with the advanced digital filtering algorithms used in the IDAX300, greatly reduces the influence of electromagnetic interference, allowing accurate and dependable results to be obtained under conditions where this would have previously been difficult or even impossible.

Speed of operation is another important benefit. Because of its efficient signal acquisition technology and the provision of two separate current measurement channels, the VAX020 + IDAX300 combination provides fast and reliable true ac measurements without the need for dc to ac conversion. Two separate measurements down to 1 mHz on a three winding transformer can be completed in about 35 minutes, whereas other instruments typically take around two hours.

In addition to allowing the IDAX300 to provide market-leading interference immunity, the VAX020 amplifier extends the capabilities of the instrument to include 50/60 Hz capacitance and tan delta measurements. The high output current capability (50 mA) of the amplifier means that it can be used with test objects with capacitance up to 80 nF at 50 Hz and 67 nF at 60 Hz. Tan delta/power factor measurements can also be made on insulating oils at up to 1,400 V rms.

The new VAX020 high voltage amplifier from Megger has an operating temperature range of -4ºF to +131ºF (-20ºC to +55ºC) making it suitable for use in even the toughest of conditions. It is supplied in a custom transport case, complete with a 10 ft (3 m) multicable to link it to an IDAX3, a 65 ft (20 m) high voltage cable, and an interlocking device.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more