Three New QuasarBrite UV LED Wavelengths

Lumex announces the global launch of their QuasarBrite™ UV family of LED technologies. The UV LEDs provide a 10 times longer lifespan, enhanced durability and up to 50% cost savings compared to alternative technologies.

The RoHs compliant QuasarBrite UV LEDs are available in 385nm, 405nm and 415nm wavelengths at 4-6mW in through-hole format.

QuasarBrite UV technology is ideal for a wide range of applications including:
  •     bacterial and superficial sterilization for medical device technologies related to phototherapy, dental, and dermatology equipment;
  •     industrial control device technology related to leak and biohazard detection;
  •     forensic applications related to counterfeit detection and forensic analysis of bodily fluids;
  •     ink fluorescing.
“Despite the many benefits of UV LED technology, adoption has been limited in the past due to the fact that the materials used in the epoxy LED lens degraded the lifespan of UV LEDs to less than 5,000 hours,” explained Jeff Oliveros, Director of Engineering at Lumex. “Replacing the epoxy lenses with a robust TO-46 package with glass lens, QuasarBrite UV LEDs now last at least ten times longer, providing a lifespan of more than 50,000 hours.”

In addition to enhanced life span, QuasarBrite UV LEDs provide several key benefits compared to alternative technologies like CCFLs. QuasarBrite UV LEDs provide a uniform beam pattern. To match this performance CCFLs would require a secondary lens resulting in additional cost and space investment. Additionally, QuasarBrite UV LEDs do not use the hazardous mercury material found in CCFL technology and are more durable in their design, thereby significantly reducing maintenance costs. Finally, Lumex’s UV LEDs have up to 70% lower energy consumption than CCFLs.  These factors combined allow Lumex’s QuasarBrite UV LEDs to provide up to a 50% cost savings compared to CCFLs.

Samples of these devices are available from stock, with custom production quantities in 8-10 weeks and standard production quantities in 6-8 weeks.  Pricing is dependent on quantity ordered, and is approximately $2.50 to $5.25 per unit in production quantities dependent on size and quantity ordered.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more