Pulse Electronics Introduces LTE Capability in Navigation Antennas

Pulse Electronics Corporation (NYSE: PULS), a leading provider of electronic components, introduces its new vehicular mount antenna for long term evolution (LTE), 3G, 4G, WLAN, and GPS applications. The GPSDM700/2500FFS offers the best gain on the market over multiple frequency bands. Wider frequency bands (698-960/1710-2170/2300-2700/1575 MHz) are covered in one small, compact 3.5” (88.3mm) tall, 4.16” (105.7mm) diameter at base antenna. This antenna is ideal for voice, mobile data, fixed broadband, navigation, asset tracking, fleet management, LTE, and 700 MHz public safety applications.

“This new antenna is ahead of the field, offering 4G and LTE operation combined with WLAN and GPS in such a small package,” said Elaine Baxter, marketing manager for Pulse Electronics Wireless Devices Division. “It will enable our customers to differentiate their products and future-proof designs by offering 4G and LTE capability ahead of wide-scale deployment.”

The broader 698-960 and 1710-2170 MHz bands have a gain of 3 dBi, while 2300-2700 MHz WLAN band has a gain of 6 dBi compared to the industry standard 2 and 4 dBi. The GPS LNA gain at 3V is 5 dBic/25 dB and at 5V is 5 dBic/30 dB.

The GPSDM700/2500FFS are rugged, aesthetically pleasing antennas with UV and IP-65 protection to ensure a long, reliable, maintenance-free life. They are also RoHS compliant.

Separate cables create maximum application flexibility. Antennas have 3 cables to optimally support the different technologies. Wireless voice, data, and LTE frequencies are supported by a single low-loss RG-58 cable. WLAN operates on a separate RG-58 cable, while the GPS antenna has its own RG-174 cable. Additional cable configurations, lengths, and connector options are available upon request. These direct mount antennas can be easily mounted through a 3/4 inch (19.05mm) hole. The antenna mount can accommodate up to a 5/8” (15.88mm) thick surface.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more