Souriau Unveils Range Connector



Souriau's UTO range connector is designed for high-speed Ethernet connections in severe operating environments, and can be assembled in less than a minute. It allows the user to use a standard RJ45 cordset and does not require any specific tooling. It is designed for field installations in applications such as robotics, machines, automation systems, rail systems and industrial telecommunications, as well as onboard applications.

The UTO RJ45 connector is easy to assemble. The user takes any new or used cordset, breaks off the standard snap clip by hand and inserts it into the socket. The clip-based mounting system developed by Souriau will then mount and securely maintain the cable. Thanks to this system and unlike competing models, the UTO RJ45 comprises only three main parts that are easily handled by the assembly operator.

It is resistant to impact and vibration, and offers excellent temperature performance from -40C to 85C. It offers IP67 sealing, and is salt-mist-resistant (for 96 hours in the black anodised ring version) and UV-resistant. It is rated for 500 mating cycles, and is equipped with the Trim Trio locking mechanism: this is a one-third of a turn bayonet locking mechanism with a click lock motion that the user can feel and hear, guaranteeing a proper connection.

It is available in a square-flange receptacle version (with four screws) or a centre Jam nut receptacle version. It supports Ethernet 10 BaseT, 100 BaseTX, 1000 BaseT, Cat5e networks to TIA/EIA 568B standards and Class D to ISO/IEC 11801. The UTO range is compliant with the European RoHS environmental directive. The UTO socket is a part of the Trim Trio family. The range is very extensive, and designed around the same modular base. The connector cavities and contacts are common to all Trim Trio connectors. As a result, users retain full freedom to design their connector, whether it be signal, power or high-speed (coax cable or optical fibre).

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more