Carlo Gavazzi Offers Variflex2 Series Of AC Drives


Carlo Gavazzi has launched a range of AC drives to deliver optimum speed control and improve efficiency in a range of industrial motor applications. The Variflex2 series comprises a basic and an advanced version, both offering a complete set of features as well as the options normally found on larger drives. The Variflex2 RVEF series is suitable for basic low-power motor-control applications, such as for pumps and fans that can be installed side by side, thus saving cabinet space.

The Variflex2 RVCF series is for more complex applications that require constant torque, including conveyors. According to the company, both versions offer simple installation with the option for DIN-rail or panel mounting and ease of use with comprehensive menus via software and push-button setup. The range of drives offers variable speeds from 0.20kW to 55.0kW, single-phase input of 110VAC/230VAC and up to three-phase 230VAC/480VAC.

The compact overall dimensions of the RVEF series fit in general-purpose motor-control applications from 0.20kW to 2.2 kW (0.25hp to 3.0hp). Available in two frame sizes, it is suitable for applications such as HVAC, chillers, water treatment and management, doors and barriers, pumping and oil stations. With six frame sizes, the RVCF is suitable for applications requiring a higher performance and power, ranging from 0.4kW to 55kW (0.5hp to 75hp), including conveyors for handling and sorting, construction, packaging and wrapping, bottling, lifts and elevators and plastic and rubber production.

Setup of the Variflex2 models can be further simplified with the use of Drivesoft: a PC software tool that enables the user to commission and store parameter settings that are also accessible via a keypad. RS232 or RS485 Modbus RTU/ASCII serial communications are available through an option card. To take advantage of the built-in PLC function, the user can also download a ladder diagram from a PC via the Windows-based downloadable software.

The Variflex2 series operates over the full -10C to +50C temperature range and is approved according to the related European and North American safety standards. It conforms to EMI radio standard and EMS immunity standard EN61800-3.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as ...
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai...
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to...
Read more