Toshiba HCV-5HA(L) Series Vacuum Contactors



400 Amp 2300-7200 Volts (Medium Voltage) The HCV-5HA, the first vacuum contactor produced in Houston, Texas, was also the first Toshiba vacuum contactor to incorporate an electronic drive unit to power the operating coils. This solid state design eliminated the economizing resistors and improved the reliability of the coil circuit. The contactor is available in either electrically maintained or latched type version. The compact size and high performance, as well as being available in a drawout design, has helped many OEMs and end-users replace old air-break contactors and breakers.

Toshiba Offers Superior Features

  • Environment Resistant: Ideal for use in high dust areas. Switching arc is contained within the vacuum bottle, shielding the main contacts.

  • Reduced Maintenance: Vacuum bottle contacts have long life with virtually no maintenance required.

  • No External Surge Protection: Special main contact materials minimize chopping current. No surge suppresser required.

  • Designed for Safety: High voltage and low voltage parts are totally separated by an insulated barrier (non-flammable molded frame).

  • Electronic Control Drive Unit: All contactors include electronic control of the operating coil which offers a wide control voltage of 100-240Vac & 100-250Vdc, anti-chopping feature and reduce power consuption.

  • New CV-10H (13.8/15kV) Contactor: This contactor replaces the CV4X2L but is now rated 320 inductive & 450 thermal amperes, and is now also available in a latched type version.

  • Designed for Longer Wear: Unique vertical magnetic arc dispersion system, USA patent (HCV-1KAU, HCV-6KAU & HCV-6KA(L)U).

  • Compact and Lightweight: Smaller than air break contactors of equivalent electrical performance.

  • Conformity to International Standards: Conforms to international industrial standards such as UL, CSA, AS, BS, NEMA, and IEC. Consult factory on each series.

  • Higher Interrupting Performance: Afford a wide margin of protective coordination with any type of power fuse resulting in increased electrical safety and reliability.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more