Roofmate LG-A Supports Code And BREEAM Targets

Roofers looking for easy wins when it comes to energy efficiency have a new insulation product to turn to Roofmate LG-A from Dow Building Solutions. New parapet insulation extends choice for roofers. The Styrofoam product is ideally suited to parapet insulation, and comes with a 10mm modified concrete topping to minimise cost and installation time.

It also complements the increasingly popular Roofmate SL-A insulation boards, designed for inverted warm roofs. Dow's A-foam range uses recycled CO2 as a blowing agent, resulting in a Global Warning Potential (GWP) of less than five - new Roofmate LG-A qualifies for Code for Sustainable Homes and BREEAM insulation specification credits. "Providing Roofmate LG in our environmentally-advanced A-foam format combines the proven benefits of the inverted roof system with an insulation product for parapets that's better for the environment," explained Richard Powell, UK Roofing Manager for Dow Building Solutions.

"It extends our roofing insulation range even further, whilst maintaining the well-known qualities of Styrofoam - low water absorption, ease of installation and of course superior insulating performance". Roofmate LG-A provides an efficient method of insulating parapets and preventing them from becoming a 'cold-sink', drawing heat from inside the building. They lock together to provide a continuous insulation layer and reduced wind-lift effects.

The boards are light enough for one man to install - even in wet weather - and they can easily be added to existing waterproofing layers. The product - which can also be used for lightweight inverted roofs - will initially be available in a thickness of 80mm plus 10mm mortar topping, with board lengths of 1,250mm and width of 600mm.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as ...
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai...
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to...
Read more