SKF To Showcase MCA Handheld Device

SKF will display its Machine Condition Advisor (MCA) handheld device at this year's Maintec industrial maintenance and asset management exhibition on 17-19 March at the NEC in Birmingham. The MCA is claimed to be an easy-to-use, ergonomically designed, handheld device, designed to simplify machine maintenance and prevent costly failures.

Putting the benefits of machine monitoring within reach of any maintenance and operations personnel, the MCA simultaneously measures vibration signals and temperature to quickly and accurately assess the condition of essential rotating equipment, such as pumps, fans, motors, compressors, cranes and conveyors. Although it is small enough to fit in the pocket or clip to a work belt, the MCA features powerful signal processing and advanced technology, making the device suitable for novice and expert users alike.

Users simply turn the unit on, then press the sensor tip against the part of the machine (usually the bearing) to be measured. Once the readings - displayed on an integral bright backlit LCD - stabilise, the user presses a button to 'hold' the values, which can then be read and recorded. The MCA measures velocity vibration signals from the machine and automatically compares them to pre-programmed ISO guidelines, while at the same time applying the SKF Enveloped Acceleration technique to compare readings with established bearing vibration guidelines.

If measurements exceed these guidelines, the unit's display shows an 'Alert' or 'Danger' alarm to indicate potential bearing damage. Simultaneous with the vibration measurement, the MCA's infrared temperature sensor also checks bearing temperatures for abnormal heat loads that could indicate lubrication problems. Powered by an environmentally friendly rechargeable lithium-ion battery, the MCA measures vibration signals from 10Hz to 1,000Hz and temperatures from -20C to +200C.

Displays can be switched between metric or English units and the rugged device is rated IP 54 for use in harsh operating environments. An optional external vibration sensor fitted with a magnet is also available for use in tight spaces or on hard-to-reach surfaces.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more