Non-hazardous graffiti remover

With its P3 Scribex 400 series, Henkel has developed a safe and environmentally sound cleaning solution for removing graffiti from rail vehicles. Unlike standard products, these cleaners do not require hazard labeling. They contain no hazardous ingredients, have low flammability and a low content of volatile organic compounds (VOC).

This new generation of powerful graffiti removers for cleaning the exterior of trains also offers multiple benefits in terms of sustainability. Scribex 400 is based on raw materials that are fit for the future without any drawbacks regarding health and safety requirements. The new formulation contains no allergenizing or ecotoxicological ingredients such as NMP or terpenes. The low VOC content of  8.6 percent minimizes pollutant emissions in the workshops. P3 Scribex 400 products also offer advantages in terms of transport and storage: The product series has a high flash point of 78°C and therefore requires no hazard labeling.

The P3 Scribex 400 series removes all known synthetic and bitumen-based spray and dispersion paints from painted surfaces without attacking the surfaces themselves. Thanks to their low-odor solvent, the products are pleasant to use and ideal for applications in indoor areas. The cleaners already deliver full performance at temperatures as low as 5°C. Their special composition also prevents rapid evaporation in warm weather, which extends the working time. The products are available in three different viscosity grades to accommodate different kinds of application equipment. The graffiti remover is offered as a sprayable liquid and as a gel. After a short contact time of five to ten minutes, the cleaner is simply washed off with water.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more