CUI’s 300 W Ac-Dc Power Supplies Offer Outstanding Power Density of 12.5 W/in3 and Meet EN60601-1 3rd Edition for Medical Applications

CUI Inc announces the addition of a family of compact 300 W power supplies to its VMS ac-dc medical power portfolio. Offering exceptionally high power density of 12.5 W/in3, the space-saving power supplies are housed in three optional case styles, including a compact U-frame measuring 5 x 3.2 x 1.5 inches (127.00 x 81.28 x 38.1 mm) and an enclosed version with top or rear fan. The power supplies meet EN60601-1 3rd edition specifications for medical and dental applications, carry UL/cUL and TUV 60601-1 3rd edition safety certifications, and provide EN55022 class B EMI compliance. They feature 4k Vac reinforced input-to-output isolation and an output-to-ground isolation of 1500 Vac.

VMS-300 power supplies have a universal 90~264 Vac input for global operation and are available with single outputs from 12 to 48 Vdc or dual outputs of 5/12 Vdc and 12/24 Vdc. The power supplies are rated for operation at full load from 0° to 50°C ambient, derating to 50% load at 70 °C. They feature active PFC and protection for over voltage, over current, short circuit, and over temperature. Connections for remote on/off control and power good are included.

“Growing power demands and increasingly complex regulatory standards continue to present challenges for the designers of medical equipment,” said Kraig Kawada, VP of Product Management for CUI. “With the addition of the VMS-300 to our medical power supply portfolio, we continue to help our customers address the needs for smaller, more efficient medical power supplies that meet all of the necessary regulatory standards.”

The VMS-300 power supply is priced at $104.54 each in quantities of 250 units.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more