Ultra-compact 2520-size TCXO, with a wide temperature range, developed for vehicular GPS applications

Nihon Dempa Kogyo Co., Ltd. (Hiroshi Takeuchi, President) has developed the TCXO (temperature-compensated crystal oscillator) with a wide temperature range in ultra-compact size of 2520 (2.5×2.0×0.8mm Typ.) for GPS applications in vehicles or other outdoor-type apparatuses.

In recent years, the role of the GPS in automobiles has been getting more and more significant. It has widely spread in the range from the system used by drivers for capturing the position of the vehicle, such as the Car Navigation System, up to the system informing the position of the vehicle to external party, such as the e-call (*1), or the system of tracing the vehicle from outside, such as SVT (*2).

In order to be applicable to such various GPS applications in vehicles, a Frequency Temperature Characteristic of ±3.0ppm has been realized (commonly around ±10ppm in the past). Furthermore, in the product with the ±0.5ppm of Frequency Temperature Characteristic, the Operating Temperature Range has been expanded to -40 to +85deg.C from -30 to +85deg.C, which previous model used.

With the higher accuracy applied for the GPS and expanded Operating Temperature Range, the available locations for installing GPS equipment has become wider. The locations have been limited in the past, such as the dashboard of vehicle, etc, but now can be installed in locations with severe temperature conditions.

Even with it's compact 2520-size, it is applicable to a wide range of usage, mainly used for in-vehicle, such as Telematics, etc.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more