Current transducer accurately measures up to 4000A

LEM has introduced the ITL 4000-S current transducer for non-invasive measurement of currents up to 4000ARMS in conductors of up to 268mm diameter. The new transducer allows the isolated measurement of AC, DC and pulsed currents, up to three times the nominal value for peak measurement at frequencies up to 50kHz (+/-1dB).

Using closed-loop Fluxgate technology, highly accurate measurements of +/-0.1% of IPN are achieved over the operating temperature range from -40°C to +70°C. This high level of accuracy also allows the measurement of small DC currents in the presence of large AC components, which is particularly useful in applications such as transformer protection. For example, it is possible to monitor +/-10A DC over a 4000ARMS AC current with an uncertainty of +/-1A over an operating temperature range from -25°C to +50°C. The technology also offers very good offset and gain thermal drift performance.

The large aperture of the ITL 4000-S makes it particularly suitable for measurements on highvoltage DC systems, which use large-diameter cables. It features high insulation for working voltages up to 1.5kVRMS in accordance with the EN 50178 standard.

The mechanical design of the transducer offers simplified access to the electronics for easy maintenance. This often avoids the need to disconnect the conductors in the final application.

The ITL 4000-S operates from a bipolar +/-24V supply, provides an analogue current output and is suitable for all industrial applications as qualified against the EN 50178 industrial standard. It is particularly suitable for DC current control in transformers, or in offshore wind turbines for DC power transmission, or for leakage current measurement in any application with high primary currents.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more