Microchip Expands USB Portfolio With Fifteen New 8-bit PIC® MCUs

Microchip Technology Inc., a leading provider of microcontroller, analog and Flash-IP solutions, today announced from the DESIGN East/ESC Boston Conference the expansion of its certified Full-Speed USB 2.0 Device PIC® microcontroller portfolio with three new Enhanced Midrange 8-bit families comprising 15 scalable MCUs ranging from 14 to 100 pins with up to 128 KB of Flash.  All feature internal clock sources with the 0.25% clock accuracy necessary for USB communication, which saves up to $0.15 by eliminating the need for an external crystal.  Additionally, all three families are eXtreme Low Power compliant, with power consumption down to 35 µA/MHz Active and 20 nA in Sleep mode.

The 14- and 20-pin PIC16F145X MCUs are Microchip’s lowest-cost and smallest-form-factor USB MCUs to date.  Available in packages as small as 4x4 mm and featuring a wide array of integrated peripherals, the three-member family enables embedded applications that require USB connectivity and capacitive touch sensing, such as pulse oxymeters, PC accessories and security dongles.

The PIC18F2X/4XK50 devices, available in 28- and 40/44-pins, offer a cost-effective, pin-compatible migration option for customers utilizing legacy PIC18 USB MCUs.  The three family members feature 1.8-5V operation, and integrate a “Charge Time Measurement Unit” for higher performance cap-touch sensing as well as measurement in applications such as audio docks and data loggers.

The full-featured PIC18F97J94 family is Microchip’s first to offer integrated LCD control, RTCC with Vbat, and USB on a single 8-bit PIC microcontroller.  Available in 64, 80 and 100 pins, the nine-member family offers a 60x8 LCD controller (for a total of 480 segments), which eliminates the need for an external controller in applications with large segmented displays.  It also integrates a real-time clock/calendar with battery back-up for end products such as home-automation/security panels, handheld scanners and single-phase energy meters.

“Today’s broad announcement demonstrates our commitment to innovation in the 8-bit MCU market,” said Steve Drehobl, vice president of Microchip’s MCU8 Division.  “No one else offers crystal-free USB microcontrollers from 14 to 100 pins with this level of integration and low power consumption.”

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more