GPEG And 4D Systems To Supply 'Smart OLED' Modules

GPEG International has announced its partnership with 4D Systems, which will provide customers with 'Smart OLED' modules. These passive- and active-matrix OLED display modules feature a built-in embedded graphics controller that ensures feature-rich functionality that can be simply and effectively incorporated into new product designs.

All 4D Systems's 'Smart OLEDs' feature: a near-360-degree viewing angle; high contrast with resolutions up to QVGA (320x240); a five-pin interface to any host device (5V, TX, RX and GND) and reset; a supply voltage from 3.6V to 6.0V; serial RS-232 (0V to 3.3V) with an auto-baud feature (300K to 128K baud); an optional USB interface via the 4D Systems micro USB (uUSB-MB5) modules; an onboard micro-SD (uSD) memory card adaptor included for storing icons, images and animations; three selectable font sizes (5x7, 8x8 and 8x12) for ASCII characters and user-defined bitmapped characters (64 at 8x8); and built-in graphics commands (line, circle, text, paint, user bitmap, background colour, put pixel and image).

OLED display modules are powered by the fully integrated Goldelox-MD1 module, which can also be supplied separately. GPEG will be providing full support for these displays, including supplying complete development kits for various OLED display resolutions.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as ...
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai...
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to...
Read more