Multi-Site Energy Data Loggers with Embedded Web Servers

CARLO GAVAZZI has launched a new line of modular monitoring systems for energy management. VMU-C EM is a data logger system for small to medium projects, VMUC-Y EM is a hardware data aggregator for medium to larger projects and Em2 Server is a software solution for large projects. They are designed to complement the extensive line of Carlo Gavazzi energy maters and current transformers.

The VMU-C EM is a combination of hardware modules, whose primary function is to collect data from a network of energy meters and environmental sensors and then make this data available to end users utilizing industry standard methods, such as integrated web server, FTP, HTTP and Modbus/TCP data transfers. In addition to data management, the VMU-C EM platform can provide a relay output, SMS or email alarms and scalable pulse rate inputs. The VMU-C EM can function as a standalone data logging solution for applications with up to 32 meters or as a data gateway for larger installations.

The VMU-Y EM is a data aggregator that is built upon the VMU-C EM hardware platform, with a primary function of aggregating data from a network of VMU-C EM data loggers in applications where support for more than 32 energy meters is required. The VMU-Y EM relies on VMU-C EM data loggers to collect the data from energy meters and environmental sensors, but it is also responsible for the management of collected data and web server function. Up to 10 VMU-C EM / 320 meters can be managed by single VMU-Y EM.

The Em2 Server is a software solution provided as a Virtual Machine software appliance to be hosted either in a customer’s facility or remote server. Similar to the VMU-Y EM, the Em2 Server relies on the VMU-C EM for communication with energy meters. It aggregates data in large applications with up to 100 VMU-C EM loggers / 3,200 energy meters and provides web server function.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as ...
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai...
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to...
Read more