Internal Disconnect Switch on SMVector Drive Makes Motor Maintenance a Breeze

Lenze-AC Tech announces the release of the SMVector Frequency Inverter with a highly visible Internal Disconnect switch. Available on NEMA 4X (IP65) enclosed drives; the switch removes power to facilitate service and maintenance. According to Lenze-AC Tech officials, use of the Internal Disconnect Switch in decentralized “point of use” operations including conveyors, fans, pumps, material handling, stackers and sorters will result in reduced downtime, with operations getting back on-line faster.

Mentioning how local electrical codes in many parts of North America require a means of power disconnection at the motor, Lenze-AC Tech VFD Product Manager Steven Dextraze states, “The minimal footprint of the SMVector with Internal Disconnect helps electricians, installers and OEMs meet those codes with one piece of equipment.” According to Dextraze, besides saving valuable real estate on the production line, the Internal Disconnect reduces equipment cost by eliminating the need for a separate external disconnect switch mounted in its own enclosure, and of additional wiring between the external disconnect and the SMVector drive.

“Drives purchased in NEMA 4X rugged enclosures are usually decentralized, installed close to the motor,” explains Steven Dextraze, and he continues, “now the user has the means of disconnecting motor power right there —no more searching for the circuit breaker panel located in a remote maintenance closet”. According to Dextraze the Internal Disconnect switch is lockable in the off position, allowing maintenance personnel to service the motor while it is still connected to the SMVector drive.

Describing the Internal Disconnect Switch as conforming to European electrical conventions, Dextraze states that this latest addition enhances the SMVector drive’s already vigilant system protection consisting of voltage monitoring, current monitoring, follower loss management and over-temperature protection.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more