Taegutec Introduces Turning Chip Breaker Insert

Taegutec has introduced the FC double-sided turning chip breaker insert that is said to be ideal for light to finishing turning applications. The FC chip breaker provides good chip control at low feed rates and small depths of cut making suitable for finish-machining operations. The FC chip breaker has a 3D serration on the cutting edge to reduce the cutting forces and extend tool life.

The specially designed chip breaker geometry will offer effective chip breaking in both turning and facing operations on carbon and alloy steel. The range is available in CNMG, WNMG, DNMG, TNMG and VNMG inserts with a capability of operating at feed rates from 0.05-0.4mm/rev at 0.2-2.5mm depth of cut. The FC chip breaker is suitable for carbon steel and alloy steel with good performance on mild steel, low-carbon steel and low-carbon alloy steel.

To further expand its turning line and in accordance with increasing market demands, Taegutec has expanded the PC chip-breaker range to incorporate additional grades for automotive applications. Providing a wider range of double-sided inserts for turning applications, the PC chip breaker design is suitable for light to medium turning applications and generates low cutting forces to increase tool life.

The PC chip breaker has the most suitable performance range for the machining of automotive components and when combined with the TT8115 and TT8125 grades, it delivers superior performance for machining on all kinds of steels including as mild steel, low-carbon steel, medium-carbon steel, high-carbon steel and bearing steel. The inserts have a positive geometry on the cutting edge that minimises cutting forces and improves tool life.

Suited to semi-finishing to medium-turning applications on forged steels, the enhanced PC range has been designed with a small and a large semi-spherical protrusion that enhances chip control not only at low feed rates and small depths of cut but also at high feed rates and large depths of cut. This 3D cutting-edge geometry combines sharpness and durability to meet all automotive turning needs.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more