Panel Thermostats Offer Peak Current Rating Of 10A

The 1T series of panel thermostats from Finder are aimed at designers and manufacturers of electrical control panels, motor control centres, distribution and server cabinets and automation systems. They are designed to maintain acceptable ambient temperature levels in electrical control panels and enclosures by controlling on/off status of heating and/or ventilation components.

The thermostats are ideal for use in controlling heating and ventilation within panels and equipment installed in areas subjected to wide variations in ambient temperature, and where temperatures inside enclosures are likely to rise considerably due to the normal operation of equipment and components contained within. Reliability is the main factor driving the demand for this type of thermostat by reducing damage to, and minimising the potential failure of equipment caused either by the effects of overheating or by condensation resulting from rapid cooling.

The units' compact 35mm (EN 60715) rail-mounting form enables easy installation, requiring minimal space requirements. Rated at 250VAC at 5A, the thermostats offer a peak current rating of 10A. For safety and reliability, a dielectric strength of 500VAC is provided between open contacts. The units' 'snap action' thermostatic bimetal sensor provides a positive switching action minimising arcing and promoting long electrical life (100,000 cycles).

A protection level of IP20 is provided. Suitable for applications in a range of environments, the 1T series thermostats feature an easily adjustable 0-60C temperature setting range for both heating and cooling outputs. The use of colour-coded dials for temperature setting - heating (red) and cooling/ventilation (blue) - facilitates quick recognition of type and control function.

CE-approved, the range of 1T thermostats comprises three compact models: one for heating, one for cooling and a combined unit providing both heating and cooling functions. All are equipped with integral sensor and simple connections ideal for quick and easy control panel installation.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as ...
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai...
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to...
Read more