MTS Offers Explosion-Proof Position Sensors


MTS has released absolute linear-position sensors, which are now available as versions approved for installation in hazardous areas. The explosion-proof versions of the Temposonics R- and G-Series position sensors are suitable for use in a potentially explosive atmosphere containing flammable gases (groups IIA, IIB and IIC) and dusts.

An independent test body certified the sensors in compliance with the European ATEX directive 94/9/EC. With above-ground applications, the position sensors meet the requirements of instrument categories 3D (Zone 2) and 3G (Zone 22). When the sensors are operated in these zones, although the atmosphere presents the corresponding explosion risk, there is no hazard of inflammation.

The transducers are available with rod- or profile-shaped housings and analogue, CAN, SSI or Start/Stop interfaces. The maximum surface temperature is 135C in a gas-containing atmosphere and 100C if dust is present in the environment. Various protection types preclude the position sensors from being a source of inflammation when operating inside an explosion-hazarded atmosphere.

When installed in hazardous areas containing dust, the airtight sensor housing ensures that the operation remains safe. The IP67-rated housing protects the sensors against ingress of dust and water. As the formation of sparks during operation is prevented, the transducers can be operated securely in an atmosphere containing gas.

As a result of the ATEX approval, the field of application of the non-contact, wear-free Temposonics linear-position sensors is extended. Explosion-protected versions are now safe for measuring applications in hazardous areas, such as paper-, textile- and wood-processing industries, for power generation and energy supply, as well as in the paint industry and for gas turbines.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more