World's Smallest PLC - Aromat NAIS FP0



Aromat NAIS/Matsushita Electric Works established a new world standard "SLIM" PLC. Starting from 10 I/O to 32 I/O, the CPU is only 25(w) x 90(h) x 70(d)mm. This is about 1/4 the size of the traditional bulky PLC style called "Brick". The FP0 saves precious panel space and money. Relay output types have removable screw terminal blocks. Power supply connector is also quick disconnect. Easy installation specially when you duplicate many systems. Up to 16 loops of PID and auto tuning are built into this “SLIM” PLC. The FP0 uses floating point math for its PID calculation which is more accurate than an integer PID. With the new thermocouple input unit, the FP0 can easily and accurately control temperature while it’s controlling I/O. The PID values can be easy calculated by the built-in auto tuning feature. 16 Auto Tuning loops can run at same time. The I-PD algorithm is also available to offer smoother control for sensitive applications. The picture left shows how small controller can control 8 loops of temperature, I/O and 2 axis of Motion.

The Aromat/NAiS FP0 Series PLC is still expandable up to 3 expansion unit right side of the CPU. It is also possible to mix and match with relay, transistor and analog. The FP0 can communicate via Ethernet, Internet, Modem as well as RS232C/485 for RTU application. Or FP0 can send E-mail out with FPWebServer. You can also monitor and edit the program via Modem, Ethernet, RS485 and RS232C. The FP0 is still world smallest PLC but it got powerful feature and industrially built. The FP0 has simultaneous 2 axis trapezoidal motion control. Programming is very simple. All you have to do is to set the low speed, high speed, acceleration time, target position and you are ready to do motion control. You can control up to 9.5KHz total.

Comments

Post a Comment

Popular posts from this blog

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

EGCS-D0 Accelerometer Now Available in 10,000g Range

Measurement Specialties, Inc. (NASDAQ: MEAS) has recently redesigned the EGCS-D0 accelerometer to enable it to accurately and reliably measure up to ±10,000g. This rugged device is critically damped, which is the ideal mechanism to protect the accelerometer against ±20,000g impacts and prevent sensor ringing. The EGCS-D0 accelerometer is now available in ranges from ±5g to ±10,000g which makes it ideal for both critical low-g measurements and high-g impacts. These units feature a Wheatstone Bridge mV output with a standard compensated temperature range of 20ºC to 80ºC (other options available). The EGCS-D0 was specifically designed for impact and shock testing in auto safety, aerospace, military and civil engineering applications. Designed to be bolt-mounted, this device operates from 2-15Vdc excitation with electrical output ratiometric to voltage input. Optional triaxial mounting blocks (MTG-F4), signal conditioners (Model 101) and auto-zero inline amplifiers (Model 140) are avai
Read more
Ilix Cermet Reamers Are Ideal For Dry Machining Engineers Cutting Tools, the UK agent for Ilix, has introduced Ilix solid-carbide and cermet reamers for the machining of hard metals. The machine reamers 6372C and 6323 allow the production of high-precision holes with good surface finish. Compared with HSS, the solid-carbide qualities enable the increase of cutting parameters and tool life. The quality of the reamers is said to guarantee high performance, even for hard metals with a resistance more than 1200N/mm2. The Ilix carbide 6372C range of hundredth reamers is from 0.98mm through to 12.05mm in increments of 0.01mm. The reamers are manufactured to a tolerance of +0.000 - +0.004mm. The cermet reamers 6323 have new cutting geometry developed by Ilix. These reamers are said to be ideal for steel machining, having high chemical stability during the cutting process. They offer good wear resistance due to the high hardness and have low material adhesion. The Ilix cermet reamer is said to
Read more