Posts

Showing posts with the label IC
Low-Pressure Gradient Professional IC Option Metrohm's 850 Professional Anion MCS Low Pressure (LP) Gradient (2.850.2210) is suitable for new method development. The use of gradient chemistry (whereby the eluent strength is increased during the run) facilitates shorter retention times for late eluting peaks. Metrohm believes that correct selection of the column and optimum mobile phase allows most separations in a routine environment to be solved isocratically. Any gradient separation also requires an additional equilibration step at the end of the separation, where the mobile phase is returned to its original (weaker) state. The 850 Professional IC Anion MCS LP Gradient can be operated with sequential, chemical or without suppression for complete flexibility. The low-pressure gradient unit is suitable for method development as it can be used as an eluent selector for automatic switching between three different eluents so method development can be automatically performed overn...
Metrohm IC Precisely Determines Anions And Cations Metrohm's hardware and software for IC automatically dilute samples inline, ensuring determined sample peak areas are within calibration limits and high ionic-concentrations don't overload the column. This in turn ensures accurate anion and cation determination. To perform automated dilutions, the 850 Professional IC, the 858 Professional Sample Processor and the MagIC NET software are equipped with a magnetic stirrer and an 800 Dosino. The latter aspirates a defined volume of undiluted sample and transfers it to the mixing vessel. This subsequently doses the dilution medium, generally ultra-pure water, into the mixing vessel. After intensive stirring, the peristaltic pump of the sample changer transfers to the injection valve of the IC. Alternatively, the sample can be injected directly. After the quantitation of the sample's constituents, the software verifies if the peak areas lie within the calibration range. If t...
Power-Management IC Suits Hand-Held Devices Austriamicrosystems has introduced the AS3607, a highly integrated power-management IC. This PMIC is suitable for portable navigation devices, portable media players, e-dictionaries, GPS devices, PDAs and a range of battery-powered hand-held devices using ARM-based processors. The output voltage and the timing of all regulators of the AS3607 are programmed via software. With the software and demo board, the OTP memory of the AS3607 can easily be programmed, enabling fast prototype runs. The slope of the ramp can be set for the step-down converters. The user can program the startup sequence with timing steps of 1 or 4ms, insuring that all ARM-based processors can easily be covered. In order to control other parts of the system, the general-purpose I/O pins can be programmed to a specific timing. The PMIC and application processor manage and optimise the power rails within the system to maximise battery charge. The AS3607 PMIC integrates ...

Rotary Encoder IC Addresses Automotive Needs

Austriamicrosystems has introduced the AS5245, a magnetic rotary encoder IC designed to address automotive requirements such as reliability, accuracy and safety. Based on Austriamicrosystems' stacked-die technology, the AS5245 provides best phase matching capabilities. No additional temperature compensation, calibration or shielding against external magnetic stray fields is needed. The digital angle data of the AS5245 is provided as a simple serial interface or as a PWM signal. In addition, an incremental quadrature output mode with an improved interpolation algorithm can be enabled and permanently programmed with a resolution of 10 or 12 bit. An internal voltage regulator allows the AS5245 to operate at 3.3 or 5V supply within a wide ambient temperature range of up to 150C. The AS5245 is available in a lead-free QFN 32 package.