Automation Parts

Stepper-Motor Controller Mounts 42mm Flange Motor The TMCM-110-42 is an intelligent stepper-motor controller and driver module designed to be mounted directly on a 42mm flange motor. The module converts the motor into a compact mechatronic device with bus-oriented or standalone control. The motor, switches, power and multi-purpose I/Os can be connected with small plug-in connectors. The module comes with the PC-based software-development environment TMCL-IDE for the Trinamic Motion Control Language (TMCL). Using predefined TMCL high-level commands, a rapid development of motion-control applications is guaranteed. There are two inputs for reference, stop switches, one general-purpose digital or analogue input and one output. The TMCM-110-42 can be controlled via an RS-232, RS-485, IC or CAN interface and communication traffic is kept very low as all time-critical operations are performed onboard. The programme can be stored in the onboard EEPROM for standalone operation and the fi...

HBM Torque Flange Has Measuring Range From 200Nm HBM has improved the performance of its T40 multi-purpose torque flange with a new rated measuring range from 200Nm. The T40 is now available with rated torques of 200nm, 500nm, 1kNm, 2 kNm, 3 kNm, 5 kNm and 10kNm. Intended to provide accurate torque measurements, even under difficult ambient conditions, the T40 features identical electrical configuration throughout the series. This allows the torque transducer to be used for a range of applications - from friction performance measurements, applications for engine or gear test benches to chassis test benches - without modifications. The T40 series' compact design means that the torque flange can be easily integrated into a test bench and is insensitive to parasitic loads. Direct mounting of machine elements - without additional joint shafts or couplings - is possible. The T40 does not use slip rings or bearings and is therefore totally maintenance and wear free. The reliability...