CARLO GAVAZZI is pleased to announce two new product lines designed specifically for harsh environments. The new ICS Inductive Proximity Sensors meet or exceed IP69K, ECOLAB, and FDA standards. The new CONB Series Cordsets meet or exceed IP69K and ECOLAB standards. Both the ICS Sensors and the CONB Cordsets are perfect for environments where high pressure sprays, high temperatures, or harsh chemicals are present.

The ICS Series sensors are the ideal solution for harsh environments such as those found in the Food and Beverage, Mobile Equipment, Chemical, Pharmaceutical, Renewable Energy and Agricultural industries. Key features and benefits include:
  •     IP69K ensures the sensor and cordset will withstand high pressure and high temperature cleaning processes
  •     ECOLAB certification ensures resistance to many harsh acids, alkalines, aggressive chemicals, cleaning agents and disinfectants
  •     FDA compliance assures that ICS Series sensors are made of materials approved for use in the food industry
  •     Wide operating range of -40°C to +80°C ( -40°F to +176°F) easily accommodates both hot and cold temperature extremes
  •     Will work reliably for up to 15 minutes in boiling water (100°C / 212°F) - thus accommodating cleaning process requirements
  •     True microprocessor-based technology allows final calibration after the assembly, enabling greater temperature stability, reliability, and repeatability
  •     The ability to re-program the microprocessor opens up opportunities to customize the sensor to specific OEM requests, such as special output types, switching frequencies, and timing functions
  •     Clearly visible diagnostic LEDs are easily viewed from any direction, and provide sensor status, set-up assistance, as well as short circuit or overload indication
  •     With up to 2,000 Hz operating frequency, the new ICS Series is one of the fastest inductive proximity sensors available on the market, making it the perfect choice for high speed counting and rotational speed monitoring
  •     Permanently legible, laser-engraved part number, cULus / CE marks, and serial number are readily visible on the sensor housing
  •     All sensors are cULus listed and CE marked
ICS Series inductive proximity sensors are available in a variety of configurations, including:
  •     Three-wire DC wiring configuration
  •     Available in M12, M18, and M30 housings
  •     All housings are 316L stainless steel
  •     Single (2-15mm) or double (4-22mm) sensing distance
  •     Flush or non-flush mounting
  •     Long barrel housings (short barrel also available for M30 housings)
  •     Normally open or normally closed outputs
  •     200mA PNP or NPN transistor output
By pairing the ICS Series or any IP69K rated sensors with the new CONB Series cordsets, a complete solution is available for the Food and Beverage industry, or any harsh environment application.

Key features and benefits include:
  •     All CONB Series cordsets are IP69K rated, and ECOLAB and UL certified
  •     Wide operating range from -40°C to 105°C ( -40°F to 221°F), one of the highest temperature ratings in the market
  •     Orange Thermoplastic elastomer cable for clear visibility of dirt accumulation
  •     Stainless Steel locking nut to resist corrosion
The CONB Series cordsets are the perfect complement to any IP69K rated sensor, including inductive, photoelectric, and capacitive sensors offered from Carlo Gavazzi. Available configurations include:
  •     Cable length of 2 meters or 5 meters
  •     Straight or 90° angle connector
  •     Non-illuminated or LED versions

Comments

Post a Comment

Popular posts from this blog

Biasi Develops ActivA Unique Boiler Range Biasi UK has developed ActivA, a new range of high efficiency A rated condensing boilers boasting a unique heat exchanger. The launch of ActivA is further testimony to the company's commitment to strengthen its position in the UK domestic gas boiler market. At the heart of ActivA is a newly developed pre-mix condensing heat exchanger that is manufactured in a corrosion resistant, pressure moulded aluminium. Its sectional construction means it can be easily adjusted for different boiler outputs and its 'multipass' design ensures very low resistance for both combustion and water passage. This unique heat exchanger carries a five year guarantee. Designed to provide outstanding heating performance at an affordable price for almost all types of domestic properties, the compact range boasts some of the smallest boilers available - at just 700mm high x 400 wide and only 290mm deep - thereby allowing installation in cupboards. As well a
Read more

Han® HC 250 high current contact

A Powerful Solution HARTING has developed the new Han® HC 250high current connector as a powerful interface that impresses by requiring little space, transmitting high current intensities and allowing flexible configuration of the number of poles. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles in a compact space – and in the existing Han® HPR housing. Technical details: - Rated current 250 A at a rated voltage of 2000 V - Termination cross-sections are: 35 mm2, 50 mm2 and 70 mm2 - Maximum four-pole interfaces in a size 24 B HPR housing, making it particularly suitable for motor connections - High quality plastic with good smoke and inflammability levels - Removal tool for simple installation and removal of the contacts and inserts - Confusion of a number of interfaces is reliably prevented by multiple coding options for the individual inserts The requirements in the railway industry are changing, as
Read more

HAZARDOUS AREAS - Comparisons Between Standards

Image
The following tables and comments are an attempt to cross reference between different National standards for Hazardous Location Definitions. We note that there is a world wide trend towards IEC standards in the electrical industry and that even the American manufacturers are gearing up to produce products to IEC standards in IEC metric dimensions. COMPARISON OF ZONES FOR ELECTRICAL EQUIPMENT IEC/CENELEC/U.K. GERMANY/JAPAN U.S.A. ZONE 0 DIVISION 1 ZONE 1 DIVISION 1 ZONE 2 DIVISION 2 COMPARISON OF CLASS II CLASSIFICATIONS - DUSTS B.S.6467 & A.S. 2236 -CLASS II U.S.A.-CLASS II DIP - NO SUB - GROUP GROUP E - METAL DUSTS GROUP F - COAL DUSTS GROUP G - GRAIN DUSTS COMPARISON OF GAS GROUPINGS FOR ELECTRICAL EQUIPMENT IEC CENELEC AUSTRALIA U.KBS4683 GERMANY & JAPAN VDEO171 RIIS-TR-TR-79-1 U.S.A. NATIONAL ELECTRIC CODE Representative Gases II IIA II IIA 1 D Propane IIB IIB 2 C Ethylene IIB IIC 3n 3a B Hydrogen IIB 3b
Read more