Posts

Showing posts from March, 2012

The ecomat Mobile Basic Line - A 3-Piece Modular Control System

ifm introduces the ecomatMobile Basic Line, a new control platform for mobile vehicles. The Basic Line is a 3-piece modular system that is easy to wire, simple to install and reduces the amount of space needed for visualization on a dashboard. The Basic Line control platform includes a three compact units – a Controller, a Relay and a Display – that together control the automation of mobile vehicles. ifm’s Basic Controller is a compact module with 32-bit processing power and 2 CAN-bus ports. The mini Controller replaces conventional relay logic and complex process controllers. Electronics are integrated into a compact, plastic housing that provides connections for inputs and outputs, communication and programming. A status LED indicates the current operating status of the module. The Basic Relay module is designed to simplify wiring and battery connection and eliminate external terminals. The easily expandable relay streamlines wiring and becomes a decentralized “control room” fo

ifm Introduces PDM360 NG Dialog Module for Visual Display of Vehicle Operations

ifm introduces the ecomat Mobile PDM360 Dialog Module that provides a visual display of machine operations and system messages. The 7“ full-color user interface display includes a 32-bit controller and four CAN interfaces to ISO 11898 that support the CANopen and SAEJ1939 protocols. The scratch-resistant display has a resolution of 800 x 480 pixels with an aspect ratio of 15.9. Images and graphics can be displayed with a color depth of 18 bits. Nine backlit function keys offer tactile feedback. The display holds one gigabyte of internal mass storage and 128 megabytes of data memory. A fully-sealed diecast aluminum housing protects the electronics and offers a NEMA rating of IP67. Integrated M12 connectors provide quick connection for supply, inputs and outputs, and communication. The high brightness display can be easily read in daylight and mounted inside a cab or on the side of a vehicle. Four CAN interfaces to ISO 11898 are used to exchange data with a connected controller,

New Rack All-Rounder Impresses Through Simplicity and Efficiency

At CeBIT 2012, Rittal is presenting a newly developed rack system, known as "TS IT" for the first time. It is envisaged as a future world standard for network and server technology. An intelligent modular system of rack and accessories, as well as reduced complexity and easy-to-install Plug & Play technology, ensure far greater efficiency in ordering and assembly - and thus lower costs. With its new "TS IT", Rittal has succeeded in meeting all the requirements of modular and flexible network and server racks with a single mass produced rack system. The new "TS IT" rack system from Rittal is now making the IT world much easier. Previously, when users chose a new rack for a network or server installation, the planning phase usually took a long time. Selection and ordering was made complicated by the large number of types and accessories and possible combinations thereof. The subsequent assembly was correspondingly complex and time-consuming once all

LTC3613 - 24V, 15A Monolithic Step Down Regulator with Differential Output Sensing

The LTC®3613 is a monolithic synchronous step-down switching regulator capable of regulating outputs from 0.6V to 5.5V with up to 15A output current. The controlled on-time constant frequency valley current mode architecture allows for both fast transient response and constant frequency switching in steady-state operation, independent of VIN, VOUT and load. This also provides excellent current sharing capability. Differential output voltage sensing along with a precision internal reference combine to offer ±0.67% output regulation, even if the output ground reference deviates from local ground by 500mV. The switching frequency can be programmed from 200kHz to 1MHz with an external resistor. The switching frequency is also phase synchronizable to an external clock in applications where switching noise/ EMI reduction is crucial. Very low tON and tOFF times allow for near 0% and near 100% duty cycles, respectively. Voltage tracking soft start-up is provided for tracking and sequenci

LTM8048 - 3.1VIN to 32VIN Isolated μModule DC/DC Converter with LDO Post Regulator

The LTM®8048 is an isolated flyback μModule DC/DC converter with LDO post regulator. The LTM8048 has an isolation rating of 725VDC. Included in the package are the switching controller, power switches, transformer, and all support components. Operating over an input voltage range of 3.1V to 32V, the LTM8048 supports an output voltage range of 2.5V to 13V, set by a single resistor. There is also a linear post regulator whose output voltage is adjustable from 1.2V to 12V as set by a single resistor. Only output, input, and bypass capacitors are needed to finish the design. Other components may be used to control the soft-start control and biasing. The LTM8048 is packaged in a thermally enhanced, compact (11.25mm × 9mm × 4.92mm) over-molded ball grid array (BGA) package suitable for automated assembly by standard surface mount equipment. The LTM8048 is RoHS compliant.