HARTING Ha-VIS preLink®

With its Ha-VIS preLink® technology, HARTING has laid the foundations for a cabling system that can be installed in both offices and IT centers as well as factories, plants and even outdoors. Ha-VIS preLink® cabling components are always assembled according to the same principle – the terminator block is firstly crimped onto the data cable and the mating face required is then snapped in.

Several mating face variants are available with the RJ45, M12 D-coded and
M12 X-coded versions. The HARTING cabling system ensures extremely fast and completely safe installation of the cabling. No matter where it is installed or which cabling components are used, the desired result is always achieved – an operationally dependable and high-performance network infrastructure. The design is naturally future-oriented to enable transmission according to category 6A / transmission class EA for 10 gigabit Ethernet. The Ha-VIS preLink® product program is undergoing constant development and extension, for example, through terminal boxes for industrial and outdoor utilization scenarios, Ha-VIS preLink® Industrial Outlet, and new intelligent patch solutions, Ha-VIS 6 Port Panel.

The companies HARTING and EasyLan cover the full spectrum of cabling solutions with their expertise in the field of infrastructure for both IP 67 environments, such as industry, automation, machinery and outdoor utilization, and IP 20 environments, such as IT centers and offices.

Comments

Post a Comment

Popular posts from this blog

Lenze 8400 Protec Tailored for Decentralized Applications and Integrated Positioning

Lenze Americas, a leading global manufacturer of electrical and mechanical drives, motion control and automation technology, announced today the release of the Plug and Drive 8400 protec frequency inverter drive for decentralized applications and those requiring integrated positioning. "For decentralized applications that require precision positioning, the 8400 protec frequency inverter is in the right place—mounted on the line or wall adjacent—ready to start, on the spot,” says Darrow Hanesian, Global Director of Inverter Products, Lenze Americas. The Lenze 8400 protec inverter ships ready to install with innovative Plug and Drive Technology, in addition to standard mains, motor, brake and communications connectors. All terminals of the 8400 protec, ranging from the shielded motor cable to the power supply and the fieldbus link, and including the terminal for the sensors, are equipped with standardized connectors to reduce installation time and increase plant availability a...
Read more

8400 HighLine Joins Lenze L-Force 8400 Inverter Drives for Motion Control

Lenze Americas, a leading global manufacturer of electrical and mechanical drives, motion control and automation technology, has launched the new 8400 HighLine Inverter Drives, part of the Lenze L-force 8400 portfolio. Designed for positioning applications, the HighLine model features integrated point-to-point positioning for up to 15 position destinations, and stores the corresponding travel profiles directly in the inverter. “Positioning in motor drive systems used to require a separate motion controller. Most applications don’t require a higher cost servo drive. Dynamic speed, torque and precision motion control can be achieved with a powerful inverter in combination with an asynchronous motor,” states Darrow Hanesian, director of inverter products, Lenze Americas. “Our streamlined HighLine delivers all the cost savings and benefits of combining two drive elements—the motion controller and the frequency inverter — into one.” The HighLine inverters’ integrated components transl...
Read more
Beko Oil-Vapour Monitor Gains TUV Certification Beko's Metpoint OCV oil-vapour monitoring system for chemical and pharmaceutical production processes has been certified by TUV Nord in accordance with the requirements of ISO 8573-1, Classes 1 to 4. According to the company, even 'oil-free' components give no guarantee for 'oil-free' compressed air, owing to the contamination of the ambient air/intake air. In most cases, a certain residual oil content cannot be entirely avoided in standard applications. The precise monitoring of the oil-vapour content, which is possible at any time, is important. In particular, in critical production processes in the chemical and pharmaceutical industry, in food production and surface coating, the analysis and control of compressed-air quality is a crucial factor, according to Beko. The network-compatible Metpoint OCV offers constant monitoring down to the range of a thousandth mg/m3 and features a touch-screen display and 24/7 pr...
Read more